Possible Vechicle items

More Vehicles for 28mm Zombie Gaming

Finding good die-cast vehicles for a 28mm Modern Wargame isn't necessarily difficult, once you settle on a scale, most of us go for 1/43 (I certainly did), it is simply a case of trawling the interwebs, scouring ebay and visiting high street stores.

Unfortunately, it is not always so easy to pick up suitable models at a reasonable price. Some of the more desirable 1/43 models can sell from anywhere up to £200 (yeah, I was surprised too). And at the lowest end of the price scale, the cars are often not even marked so you know what scale they are.

Whilst hunting for vehicles to fill the streets of Outbreak City one tip I found useful was to keep a 28mm model (unpainted) in my pocket whenever I headed to the shops. So if I stumbled across something that looked promising, I had something to compare it against. This didn't guarantee against the perils of scale creep, but it certainly helped.

This little trick stood me in good stead this weekend when, whilst guarding the trolley against the addition of surplus items (kids do that sometimes) during our weekly food shop, I spotted these three beauties in the reduced goods aisle at Tesco.

1/43 - 28mm stone quarry tipper.

1/43 - 28mm Up-and-over skip

1/43 - 28mm refuse lorry, comes with an 1100l Eurobin

These are from their 'large industrial series' and the three models available were a refuse lorry, a truck hauling a large skip and a stone quarry delivery tipper. These are not the smaller HotWheels/Matchbox scale cars. These 1/43 equivalents are not always on the shelves for long, but they're worth it if you can find them.


£1.75 each in Tesco's reduced section. It got my attention.



The potential of the Tesco models was first highlighted to me over at Colin's Down Among the Zed Men. I've always kept an eye out since. Each one of these models was sold for the princely sum of £1.75. Falling prey to the 'addition of surplus items' demon, I almost bought the lot, but settled on one of each instead.

I think they're actually might be just a little bit bigger than 1/43. But they match very closely in scale to the delivery trucks I picked up - the Tesco Load and Go sets, which I updated with BioFlex livery.

Comparison - same scale, more detail, lower price.

In comparison these vehicles are of a far better standard than the previous ones, with crisper lines and additional detailing. They all have moving parts - great for us gamers who like to move bits on models to represent different scenarios on the tabletop and the inclusion of the 1100 litre Eurobin (sometimes referred to as a Taylor bin) is a bonus.

A little large for 28mm but it works well enough.

However, as the name suggests, I'm not sure they have Eurobins in the states, where my Outbreak City campaign is set. I think I'll use it all the same.