Wednesday, June 5, 2013

flame-sculpting and painting tutorial

ell, as many of you will have noticed I posted these images of my finished Phoenix Guard recently, and I had a lot of requests for a tutorial on how I did the flame. So here it is.

Image


Image

First the get-out clause. I am by no means good with greenstuff. So the first thing to take from that admission is that anyone can do this. Second, I am not saying that my flames are particularly good and there are bound to be others out there with a better technique that produces better results than mine. However when I decided to start this project I did search for tutorials on how to make flame and couldn’t find anything decent at all. As a result I just made it up myself and found that it was actually very easy to get fairly effective results. Hopefully some people will find this useful.

I’ll run through three quick examples that took me, all in all, about 20 minutes to do.

Example 1.

The first is some free-standing fire on an 80mm x 20mm regimental base. The idea is that I will use this as a marker in the game for spells such as Wall of Fire or Flames of the Phoenix.

1/ Sausage time.

Image

Start with the base, get a fair bit of greenstuff, make an appropriate length sausage and stick it on. I find with flames that, unlike a lot of other greenstuff modelling, that you can only do it while the greenstuff is fairly fresh and soft. Once it starts to harden a little it is too resistant to the teasing (see below).

2/ Squish and squidge.

Image

Next I shaped it a little. I’ve found that the height of the flames will depend upon how much greenstuff there is in any one place, and as you want some variety in the height of the flames, you want to vary the thickness of the greenstuff. Also, as you’ll be teasing the greenstuff away from the base to which it is stuck, you need to make sure you have a pretty good adhesion. So squish it down a bit and squidge it around.

(Not sure if I can take out a patent on the terms Squish and Squidge…)

3/ Prod and tease.

Image

Image

Now to the core technique (if it can even be deemed complicated enough to be regarded as a “technique”) of making flames my way. In this example I used the citadel modelling tool, however you can use anything with a thickish point – although you don’t want it too sharp at this stage or it will pull through the greenstuff.

Also, you need lots of spit at this stage. You don’t want the greenstuff sticking to the tip of your tool, so you need to keep lubricating it. Spit works fine, otherwise you can keep dipping your tool in beer, which seems to work ok too and doesn’t change the colour or taste of the beer noticeably at all.

This is what I recommend:

Image

Now I usually select a spot on the greenstuff where there is a bit of a natural bulge or excess of greenstuff, rather than going for a divot. I’m not certain that this is essential when working with quite a lot of greenstuff as with this base, but it is better when working with finer flame sculpting such as on a sword, as you’ll see later.

Prod the tip of the tool into the greenstuff, then simply tease it up. Tease gently, or the tool will pull through too easily.

4/ Repeat.

Image

Repeat this again and again, working first on one side, until all the greenstuff is teased up. It will look like this. At this stage it is all a bit too uniform and straight, but that will change.

5/ Go around the back and undo all your good work.

Image

Now that you’ve done one side, turn the base around and start on the other side. Prod and tease, prod and tease.

By now you should be getting rather bored, and be a little concerned about the unconvincing appearance of your flame. Never mind that, prod and tease away. Remember to work from the centre out, and go right to the edge of the greenstuff, making the tiniest little “flickers” on the margins of the greenstuff.

You will notice now that you seem to be wrecking the nice job you did on the other side of the greenstuff, and that as you tease up the greenstuff it is curling over the flames on side 1.

Image

Don’t worry. Firstly because the job you did on side one probably wasn’t that good anyway, second because it is a necessary part of the shaping.

6/ One side to the other….

Image

Image

So once you’ve finished side 2, go back to side 1 and start correcting all the curling that you’ve just produced to get the flame standing upright again. You will need lots of spit and a bit of care at this stage. What you will notice is that the greenstuff flame is now getting thinner and thinner, and that if you’re to rough you will just pull through it. As the flame gets finer, you may want to switch to a finer tool (I used the back edge of a scalpel) to finish off as the citadel tool may be getting a bit thick and clumsy at this stage. Just keep switching, from one side to the other, teasing the greenstuff up until it is all flickering upwards, is high enough, and you are happy with the result. It will now look something like this:

7/ Let it harden.

Image

In this case I dried it upside-down. This is probably irrelevant and is the first time I’ve tried it. But I have found that gravity will curl over the finer tips of the flame, and you don’t want your flame curling over too much or it will look silly.

8/ Paint it.
I’ll get back to the painting later.

Example 2.
For example 2 I’ll add some flame to the sword of this hero. This is a little unusual as the sword blade he is holding is flat, whereas most models have their weapons edge-up. It doesn’t really matter. You just have to remember that flame rises, so however the object is, you need to be teasing the flame upwards.

So, first up is sausage time.

Image

Image

Then squish and squidge.

Image

For the squishing on weapons I tend to use the “sharp” edge of the modelling tool and create loads of grooves in the greenstuff, running in the direction the flame will be going – i.e. up. This helps create and define the blobs that you will be teasing up into flame.

Then prod and tease, both sides, come back again, do each side a couple of times and hey presto!

Image

You’ll find you’ll need to be a little careful with smaller flames as there is often not much adhesion, and as you are prodding and teasing, the greenstuff sometimes comes off the object altogether and you’ll have to start again. That’s why the squishing is important as it sticks the greenstuff down fairly securely.

Example 3.
Well, here’s a very old mage of mine that doesn’t really need a flaming sword, but he was the nearest thing I could reach and as I’m not too attached to him I’m not too worried what he looks like.

Sausage time.

Image

Image

Squish and Squidge.
(Sorry, photo didn't work. But same principle as above.)

Prod and tease.

Image

Oops! You’ll see that on one side of the sword the greenstuff pulled away. I don’t really mind this, to be honest, as flame should look a bit random, and that’s exactly what mistakes like this achieve.

A final note. This is just the beginning of making flame. Another thing flame can be used for is to create a sense of movement. Charging cavalry or flying creatures, the flames will flicker behind as the model surges forward.

I haven’t tried this yet but am about to. The model below is my next project.

Image

The rod from mouth to rock is going to become a great spout of flame from the dragon’s mouth. I envisage it engulfing one side of the rock. On the other side of the rock will be a model trying to hide from the flames. But also, as it is a fire-breathing dragon, I am going to use a bit of flame on its’ body. From the wings for example, streaming behind, and hopefully I will achieve the effect of a dragon swooping at great speed, flame flickering behind it, and a great eruption of flame from it’s mouth. It will also provide the support to suspend the dragon.

I’ll keep you updated.

I will also paint the above models and post photos of this too, so there will be a finished product.

Good luck.

Update. Finished the flame on the dragon using the above technique. I don't think I'll put the dragon in flames as it may detract from the big spout from his mouth.

Image

Image

So, a bit more greenstuffing on the mage - mainly hair and cloak flailing behind to give the appearance of rapid descent from above - and used the flame technique again to create the fire bursting from his wand. Used a paperclip and then built the flame around it.

Image

Image

Image

One Empire hero hiding behind the rock: I will also do a stout soldier of Talabecland on the ground, bum in the air, hands over his ears...

Image

Image

Image

So here is how I paint the flame. Remember that flame is actually white at its' hottest, and gets darker to the cooler tips which can be depicted as a red-brown-orange colour depending on your taste. Also, dirty fuel burns dirty, so with 40K flame (a flamer for example) you may want to finish it off with a brown-black drybrushing at the tips. As I'm doing dragon fire, however, it will be a "clean" flame.

First, white undercoat. I have given it 3 coats to try and get it very white.

Image

Image

Image

Image

Image

I used vallejo paints. I think the pigments are stronger which is important for reds and yellows, and as they don't dry up in the pots there's no fiddly thinning down etc.

First, a 60:40 mix of white and golden yellow (same in GW).

Image

You'll notice that I've spared the deeper recesses of the flame, to allow the hot "core" of the flame to show through. Also, I've allowed more white to show through closer to the mouth where the flame will be hotter. However, the white didn't look harsh enough for me so I went back with a small brush and carefully picked out the deeper bits I wanted white, once again with more of it closer to the mouth.

Image

After this I went to pure golden yellow and highlighted the flame, bearing in mind that I might not go much past golden yellow at the mouth, but would be going all the way to red gore/scab red at the rock end of the flame. The highlighting itself is pretty easy. You do want to make it fairly neat, but it doesn't have to be perfect. I did a sort of "wetbrush" where I use a normal amount of paint on the brush but run the side of the brush, rather than the tip, over the raised edges of the flame.

Image

I continued this technique but shifted to a smaller brush and was a little more careful about the highlights, making sure I kept the next layer - this one orange fire - within the boundaries of the golden yellow.

Image

You'll notice there is very little orange near the mouth, and far more at the extremeties of the flame. This is important to try and help with the source of the heat.

Next, orange, once again working on the very tips of the flame, and starting further away from the mouth again so that, near the mouth, some of the final highlights are no more than golden yellow or orange fire.

Image

At this stage the next highlight would be bloody red (blood red), however I didn't like the effect on the falling/burning Empire soldiers so I skipped that shade and went straight to gory red/red gore. I was very sparing with this, once again using more at the distant flame, and none closer to the mouth than midway along the spout of flame.

Image

Image

Of course painting the flame is only part of it. Then you need to do the source lighting, i.e. the reflected light from the flame on the objects around. You will notice that I have drybrushed very lightly the nearby rock in orange and yellow, and highlighted the Empire soldiers very brightly where it is opposite the flame, and almost not at all on their "dark side".

When the model is finished and the Empire soldiers glued in place, the grass done etc., I will go back and improve/strengthen the source lighting. I will probably update the tutorial at that stage.

Hope this helps. Flame is pretty easy really, you just need to have a go.

http://warhammer.org.uk/phpBB/viewtopic.php?t=43941

No comments:

Post a Comment